Wire and Cable Making Machine with 25mm High Temperature Extra Thin Wire and Cable Extresion Machine

Product Description

Product Description

It's suitable for Teflon insulation extrusion of ultra-fine coaxial wire or high frequency wire number transmission wire Teflon insulation extrusion and other wire extrusion.

Detailed Photos

Features

1.High precision: The Teflon cores are produced with an overall precision design from the discharge to the take-up, with absolute stability of the online tension, ensuring a continuous and smooth extrusion of the cores.
2.High quality: Concentricity of extruded products: 93% or more: Tolerance of outer diameter: ±0.002
3.Stable temperature control: exclusive use of Newtopp Teflon special industrial control machine, Chinese/English interface optional, fully automatic control, simple operation
4.Less space required: the design of the machine is integrated, the appearance is beautiful, and the traditional 4-in-1 system of wire release, wire tensioning, preheating, straightening, lead-in and take-out is 2-in-1, with a box structure, the total length is reduced by more than 5 metres.

 

Specification

1.Payoff parameters

type	Single head with shaft (with tension indicator)
Discharge method.	Intelligent power tracking discharge
Tension adjustment method	PID function with graduated swing arm slider for tension adjustment
Spool locking method	With rotating locker
Spool rotation method	With Siemens Beder motor tracking drive
Applicable bobbin sizes.	200-300 Shaft size

2.Preheater parameters

Brand	Shenzhen, Yadevi
Type	Preheating in a constant temperature oven
Wire diameter (heating wire)	0.045-2mm
Heating temperature	0-15.1ºC Automatic adjusting along with line speed
Power supply	380V 50HZ
Line speed	MAX500M/min
Wheel diameter	Φ150mm

3.Straightening toolbox

Type	Horizontal 5 rounds Φ30mm straightening wheel
Straightening tension	manual adjustment type
Five wheel sets of guide wheel	can be arranged up and down two or three, the relative position is adjustabl

4.30mm host parameters

Screw:	25mm using VD alloy steel C-276,L/D ratio 26:1
Screw barrel:	Φ25mm using VDM alloy steel C-276
Transmission:	Adopt high-strength, polished hard tooth surface ZDY-133 type
Heating:	The whole machine 7 sections of heating (body 4 sections, machine strength / head / eye film at each one) temperature control accuracy within 1 degree
Cooling:	When the actual temperature is higher than the set temperature, automatically cut off the power supply to the heating element, and at the same time, turn on the cooling blower
Host speed:	50RPM/MAX
Host power:	Using 7.5KW Huichuan servo motor + complete set of servo controller
Heating device structure:	Heating device for the full cast copper structure or ceramic electric heating ring
Head unit:	One set of head drainage system unit

5.Temperature control box

1.the thermostat adopts imported Omron self-tuning regulation

2.electrical components and instruments are imported well-known brands

3.the heating device is controlled by solid-state relay

4.the touch screen adopts Tongtai special industrial computer

5.the PLC adopts Taiwan Yonghong FBS series

6.the interior of the electrical control box is assembled according to International Electrotechnical standards, with good heat dissipation and dust resistance.

7.built in xj-003-c special controller for automatic ejecting machine

6.1.5m automatic movable water tank

1.model: xj-1.5m-00

2.all stainless steel water tank 1500 + 100mm structure

3.the travel distance is 300mm

4.built in closed blow type water wiper

5.200W adjustable circulating water pump

6.the front movable water tank is used for electrothermal circulating water supply, and the thermostat controls the water temperature

7.6m single-layer cooling water tank

1.model: xj-6m - 00

2.length of sink: 6m U-shaped, 100 wide * 135 high

3.sink material: SUS 304

4.stainless steel to ensure no rust stainless steel filter screen shall be added at the water return port, and all visiblestainless steel cover plates shall be added

8.8m horizontal wire storage rack

1.model: xj-08cxj

2.high precision structure, tension range: 10-2000g

3.install the wire tray, on which there is a wire to roller

4.Wire storage wheel 120*(10 grooves+11 grooves) with bilateral

5.Aluminum wheel with anodic hardening treatment

6.Built-in displacement sensor, real-time stable tracking tension

7.Added online tension detection device, real-time monitoring of the storage line tension

9.Φ318mm single pulley type belt drawer

1.Φ318 single aluminum wheel covered with belt lead type, surface anodic hardening treatment

2.The main power is 2KW Huichuan servo motor+sets of servo controller

3.The single wheel adopts the belt over the pick-up wheel structure

4.Closed stainless steel structure

10.Φ200-300mm double spool winder

1.Two-axis winding

2.The power of winder is 2HP Siemens motor + Huichuan inverter

3.After the meter reaches the pre-warning, it can stop automatically and can keep the thread diameter automatically.

4.Single/linkage operation is available, suitable for Φ200-300mm spool.

5.The line is controlled by 400W Huichuan servo motor+sets of servo controller.

11.outer diameter tester.

Function: Setting and displaying data, with 485 communication interface
 

Brand: Shanghai Oller (outsourced products)

Measuring range:MAX:27mm Accuracy:±0.001mm

Size:L*W*H 290*66*170mm Weight:5kg

The wire diameter controller is installed with one set of wire wheels on each side

Automatic control of wire diameter, maintain ±0.002 tolerance

12.high frequency spark machine

Form	HS015E
Brand	Taiwan Hetai
Testing voltage	1.0-15KV
Testing frequenc	2-3.5KHz
Weight	5kg
Testing wire diameter range	25mm
Wire speed	2000M/min

 

Company Profile

Our aim: To be a world-class supplier providing wire & cable manufacturing and using solution.
Our vision: To make wire & cable manufacturing and using more humanized.
Our target: More professional customer service, struggle for employees' dreams.
We are a Hong Kong company, focusing on in-depth cooperation with Chinese leading manufacturers to provide advanced wire&cable solutions.

Our sales and technical team

 

Exhibition and Certificate

Packing and Shipping

Customer Cases

 

FAQ

 

1. who are we?	We are based in Guangdong, China, start from 2017, sell to Africa(17.00%), Mid East(17.00%), Southeast Asia(16.00%), Eastern Asia(13.00%), South Asia(10.00%), South America(8.00%), Eastern Europe(4.00%), North America(3.00%), Northern Europe(3.00%), Southern Europe(3.00%), Oceania(2.00%), Western Europe(2.00%), Central America(2.00%). There are 5-10 professional worker in HOOHA.
2. how can we guarantee quality?	Always a pre-production sample before mass production; Always final Inspection before shipment;
3.what can you buy from us?	Drawing Machine,Stranding Machine,Cabling Machine,Extrusion Machine,Bunching Machine
4. why should you buy from us not from other suppliers?	1.10 year R&D working experience with over sea service 2.5 big LV/MV cable project over 5 million working experience 3.After service team has 30 country working experience  4. HOOHA team focus on the cable making and use solution supply chain.
5. what services can we provide?	Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery; Accepted Payment Currency:USD,EUR,CNY; Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash; Language Spoken:English,Chinese
6.After service	1. Delivery dates: 45 days 2. Payment: TT or L/C 3. Packing: Plastic packing to ensure the goods safety on the transportation. 4. Install and training service: 2 professional engineers who has over 5 years overseas install and cable manufacture training experience. 5. After service phone number online.