1250mm Bow Stranding Machine For 25-35mm2 Copper Wire,Aluminum Wire
Application:
This machine is suitable to strand copper wire ,aluminum wire on 25 mm2 , 35mm2 , suit for flexible cable at 4 x 16 mm2
Specificatioons of the machine
Structure of machine: Handing-frame cradle style; Machine and case are designed seperatedly; Tracion and take up y motor;
Pitch adjustment mode: Digital specified, controlled by program;
Operation interface: HMI;
Main components: Siemens, Schneider, NSK
Designed speed: 800r/min
Wire range: 10-50mm2
Bow material: Carbon fibers;
Loading&removing of bobbin: By hydraulic elevator; Electric tip cone.
Φ1000-Φ1250 Bow-type Stranding Machine
Specifications
Machine model |
HH-Φ1000 |
HH-Φ1250 |
| Finish stranded wire max. diameter (mm) |
Φ8.0 |
Φ15.0 |
| Stranding sec.area (mm2) |
1.2-38.0 |
3.5-50.0 |
| Insulation wire individual(mm) |
1.0-2.5 |
1.0-3.5 |
| Max.RPM |
800rpm(1600tpm/min) |
600rpm(1200tpm/min) |
| Main motor |
40HP DC motor |
50HP DC motor |
| Electronic control system |
Parameter controlled by touch an LCD |
| Bobbin model |
Motor-driven,fixed position |
| Weight(kgs) |
9500 |
11000 |
Spare Parts Brands:
Motor: Teco, ABB, Siemens
Inverter : Japan Yaskawa, Siemens, Taiwan Teco
Temperature Control Meter: Japan RKC;
Auxiliary Relay: Japan Omron ;
Ammeter and Voltmeter: Taiwan Risesun ;
Indicator, Switch and Button: Taiwan TEND ;
Contactor: Taiwan Shihlin
Machine parameters
But machine should be designed to last up to 5,000Kgs.
A. Supply scope and Specification:
1. Line composed of:
1 ) 800 (630) mm pay-off: 800 (630) mm x 10 Head motorized pay-off
2) Collective base
3) Electrical Control Box
4) 1250 mm Double Twist Machine Main body
2. Specification of Main body:
1) Final application:
Bunching of Bare copper wire, Stranding of Insulated cable
2) Inlet size:
- Bare Cu. Wire 0.5 - 1 .5 mm dia.
- Insulated core cable 1.0 - 8.0 mm dia.
3) Finished size after bunching & Stranding:
- Bare Cu. Wire 7.0 mm dia.
- Insulated core cable 20.0 mm dia.
But this machine should produce bare copper wire stranded as finished product
up to 35 mm sq.
4-1 ) Lay pitch: 30 - 250 mm, Pitch range: 50 mm to 250 mm at each 10 mm interval
EHI will provide the supplier with data sheet for all pitches
4-2) Pitch changing mechanism: by Electronic pitch changing system
5) Traversing:
40 mm Rolling rod (German) + traversing unit (Tian Xiang) but inside Bearing equipped
with NSK Bearings
6) Line speed:
Max. 700 rpm, Speed controlled by Inverter
7) Standing & Bunching Direction:
S or Z direction, Direction by manual switch
8) Bobbin Lift Up and Down: By Oil (Hydraulic) lifter with 5 HP AC motor
9) Take-up bobbin: 1250 mm. As per the attached drawing
Max. weight of take-up bobbin (fully wound): 4,000Kgs
1 0) Motor:
Main body: 50 HP AC Motor + 50 HP Inverter
1 1 ) Length counter: Taiwan TOFEK PM12-04N Sensor, 5 digit, Accuracy +/- 0.3%
12) Supply Power: 380 Volt., 60Hz, 3 Phase
13) Emergency stop for safety:
When door opened. When Lifter is not located in the right positions
1 4) Automatic stop:
Cable broken, Cable reached to preset length
1 5) Detecting device for Broken end: to be mounted
Its location: 1 inside + 1 outside
16) Main control panel:
Mitsubishi Touch screen & Mitsubishi PLC
1 7) HDI: Digital display for Rotational speed, Line speed, Length counter, Working hours,
Alarm failure indicator
18) Steel plate for Main frame
18-1) St. plate Grade: to be specified
18-2) St. plate Thickness:
- Thickness of Bottom steel plate base: mm T.
- Thickness of Wall side: mm T.
The supplier guarantee unacceptably severe Vibration (this severe vibration will effect
directly life-time of machine after long-term use) will not happen.
19) Main Bearing & Cooling system for main bearing:
19-1) Bearing brand: NSK
19-2) Cooling system: Auto. Grease Feeding System (total 2 sets)
20) Cooling system inside DTB: High speed 4 Fans
20-1) Capacity of Fan motor: 1 HP/fan
20-2) Air OUT from DTB: 4 Positions at Top side by 1 HP at each position
20-3) Air IN to DTB: 2 Positions at Back-wall side but no fans
21) Tension control: 20 Kg Powder Clutch (Taiwan)
22) Emergency Brake:
22-1) Inside by Electromagnetic brake (Brand name and its specification to be specified)
22-2) Outside by Disk type brake (Taiwan brand, its specification to be specified)
23) Flying Bow: Carbon fiber bow type
24) Heat-treatment:
Heat-treatment should be done for all metal moving parts & components
25) Bearings to be used at other places: NSK and NACHI
26) Dimension: mm L. x mm W. x mm H.
27) Tension ON/OFF: to be equipped
28) Size of Capstan inside main body: mm dia.
The supplier guarantee no damage to cable quality (insulated finished cable 35 mm sq.)
by bending severely even on the a.m. capstan size
29) Noise level: Below 85 dB
30) Lubricating system for inside Main shaft: to be located Outside but manual grease feeding
2)Installation and debugging of overall machinery and accessories of the cable factory
7)Overseas on-site guidance and consulting services for equipment installation.
8)Maintenance,reconstruction and upgrade services of the overall equipment.
A:China famous brand and taiwan brand.
A. Yes , we have,our youtube channel : tiezhong chi
Audited Supplier 
){kind=link}